Ladder Bracket | Australian Made

TEMPORARY & PERMANENT APPLICATION (2023 current)

20% OFF RRP - Limited Time

 

 What Makes Us Different:

• Ladder brackets designed by ANKAme fit on bottom or side of metal roofs. ANKAme roof ladder bracket fits up and over the most common gutter profiles ( so ladder does not rest against gutter ). Australian made safe ladder access brackets, temporary & permanent application. 

• Aligns to all common metal roof screw patterns & profile.

• Temporary application just use existing roof screws ( minimum x2 fixings as per user manual ) for easy, quick, safe installation.

• Temporary or permanent application ( comes with permanent fixings ).

• Fully compliant to AS/NZS 1657:2018.

• Can be installed and used by any competent person, tradie or DIY, as per AS/NZS and user manual.

• Simple installation method, with QR code user manual installation instructions on each ladder safety bracket ( for easy install, 20 seconds ).

• Metal roof fix and wall mounted fix.

• Fits the most common & industrial width extension ladders.

• Strong and durable ( 1kg ).

• Made from hi-grade aluminium ( compatible with direct contact to colourbond roof sheeting )

• Adapts to all the most common types of metal roof sheeting & concrete application, approximate size = 525mm X 525mm "external measurements".

 

We guarantee your safety with our products

 

ANKAme height safety roof ladder bracket complies with AS/NZS 1657:2018. PATENT PENDING. REGISTERED DESIGN.

The ANKAme roof ladder safety brackets are fully compliant with Australian Standards AS/NZS 1657:2018 as per the SafeWork Australia falls code. The ANKAme roof ladder safety bracket has been designed by metal roofing specialists for easy install and use, to ensure your safety whilst working at heights. The roof ladder gutter bracket can be surface mounted to any metal, concrete or masonry roofing or walls, temporarily or permanently fixed.

The roof safety ladder brackets can be installed and used by competent persons as per AS/NZS

The roof safety ladder bracket is constructed from 5mm high-grade, durable aluminium plate, with a linished finish

 

COMES WITH:

1 x ladder bracket, 1 x installation and user guide, 4 x permanent fixings (M12 X 25MM HEX HEAD SCREWS) ONLY

 

SELECTION, USE AND MAINTENANCE

Ladder should be tied to roof safety ladder safety bracket during use. Do not install ladder brackets in a corrosive environment. Do not use chemicals to clean. Wipe with a clean, damp cloth regularly. Ladder brackets should be inspected every 12 months and prior to each use.

 

QUICK INSTALLATION GUIDE

 

PERMANENT fix onto METAL ROOFS

For permanent ladder bracket metal roof fix, a minimum of 4 12x25mm roof screws with neoprene washer must be used for the permanent fix installation onto metal material, as shown in FIG 1.A

Comes with permanent fixings.

Fig 1A – Metal roof / wall – Permanent fix application

 

 

TEMPORARY roof fix onto - METAL ROOFS

For temporary ladder bracket metal roof fix, a minimum of 2 12x55mm standard roof screws with neoprene washer are used for the temporary fix installation onto metal roofs or walls as shown in FIG 2.A. (You can use existing roof screws and replace existing roof screws when completed)      

All screws must penetrate into timber or steel structure below roof sheeting, as shown. Use fixings from existing roof for temporary fixing of ladder access bracket. Temporary fix application is not suitable for Permanent fix application.

Fig 2A – Metal roof / wall – Temporary fix application

 

TEMPORARY or PERMANENT fix onto CONCRETE or MASONRY WALLS

For ladder wall support brackets, a minimum of 2 8x50mm anchor bolts are used for the permanent fix installation onto concrete roofs or walls, as shown as shown in FIG 3.A

Fig 3A – Concrete or Masonry / wall – Permanent or Temporary fix application

DOWNLOADS

Installation and User Guide

 

DISCLAIMER - INSTALLATION OF SAFETY PRODUCTS

The Manufacturer / Distributor cannot be held responsible for the misuse of products. Persons installing these products must be competent. All persons installing Height Safety Products must deem themself competent or have contacted a competent person. The manufacturers installation and recommended user manual must be adhered to at all times. The Manufacturer / Distributor cannot be held responsible for incorrect installation or use. 

 

FAQ / Read more .... 

 

 

What is a competent person

A person who has, through a combination of training, education and experience, acquired knowledge and skills enabling that person to correctly perform a specified task.

When do I need to use a roof safety ladder bracket for roofs

• The Work at Height Regulations 2005 state that whenever there is the potential for a person to fall while working and this leads to injury, then the worker must have some form of protection. What type of protection depends on a risk assessment being carried out and a method of protection selected from the hierarchy of control.

What is a ladder bracket

• A ladder bracket is a ladder safety device used to secure the top of the ladder to the roof or wall mounted, for the worker to gain safe access to the roof or wall via the ladder.

How to use a ladder and install a roof safety ladder bracket

• As per AS/NZS a competent person must install and use ladder brackets, always follow the manufactures selection use and maintenance user guide, if in doubt ask.

Who can install ladder brackets

• As per the AS/NZS a competent person can install the safe ladder access bracket as per manufactures user manual, if in doubt ask a competent person or the manufacture.

Who can use ladder brackets

• As per the AS/NZS a competent person can use the safe ladder bracket as per manufactures user manual, if in doubt ask a competent person or the manufacture.

What is a roof safety ladder bracket 

• Once the roof safety ladder bracket has been installed as per the user manual, then the ladder should always be tied off to the ladder bracket to prevent the ladder from slipping, this forms part of the OHS requirements.

What's the difference between a roof and wall mounted ladder gutter bracket 

• The ANKAme ladder gutter bracket has been designed by metal roofing specialists so that the ladder gutter bracket can adapt to all metal roof types and also to concrete or masonry walls.

Roof safety ladder brackets Australian standards and compliance 

• The ANKAme ladder bracket is fully compliant with Australian standard AS/NZS 1657:2018.

Can the ANKAme ladder access bracket fit any extension ladder 

• Yes the ANKAme ladder access bracket has been designed to fit the widest commercial extension ladder.

Dose a safe ladder bracket need to be load rated 

• Ladder brackets do not need to be load rated, as per the AS/NZS.

Can the ANKAme ladder gutter brackets be used on any metal roof type in any location 

• Yes the ANKAme ladder gutter bracket can fit on all types of metal roofs, either side of roof or at bottom of roof, up and over the external gutters.

Do the ANKAme ladder roof safety brackets come with user manual and fastening's 

• Yes the ANKAme roof ladder safety bracket comes with a user manual, and x4 12X25 fixing screws come with each ladder bracket for the permanent fix, and for the temporary fix just use the existing roof screws.

Roof safety ladder brackets near me 

• Yes the ANKAme roof safety ladder brackets and height safety equipment are sold online and with over 33 trusted resellers Australia wide, incudes Tasmanian and New Zealand.

What is ladder safety and why use ANKAme ladder safety brackets 

• Ladder safety must be taken into consideration when using an extension ladder to access your roof or building. It is important that three points of contact are maintained when ascending or descending from the ladder. The ANKAme ladder safety bracket is a safe easy to use option that can prevent you and your ladder from a slip or a fall and save you from serious injury.

 

 

 Height Safety Shop ALL