name: Applications

Applications for ANKAme

ANKAme roof anchors have been especially manufactured not only to comply to Australian and New Zealand Safety Standards, but to also deliver a user friendly, safety installation suitable for most roof surfaces to help protect you and your workers whilst working at heights.  

Klip lock 700 Permanent Roof Anchor Complies
Klip lock 500 Permanent Roof Anchor Complies
Custom Orb Permanent Roof Anchor / Temporary Roof Anchor Complies
Trim Deck Permanent Roof Anchor / Temporary Roof Anchor Complies
Span Deck Permanent Roof Anchor / Temporary Roof Anchor Complies
Concrete Permanent Roof Anchor / Temporary Roof Anchor Complies

Some of the roof sheet profiles above may also be known as a different name but same profile this is due to the different manufactures and some roof sheet profiles can vary up to 5 mm.

Load Testing and Roof Anchor Sheet Profiles

Load sell testing set up

Load sell directional testing to 15kN

profile1.jpg profile2.jpg

The ANKA me roof anchor has been designed and tested to suit the following roof sheet profiles and concrete;

( Roof sheet profile )   ( Surface mounted application )

Roof Anchor Applications Strength Requirement Test Method:

The ANKAme Roof Anchor was installed into roof sheeting and concrete, and proof loaded to 15kN as per AS/NZS 1891.4:2009 Clause 3.1, Table 3.1 (a) use for free fall arrest, single point anchorage for one person. Please refer to the loading diagram above.

Compliant and Certified Roof Anchor Applications (AS/NZS)

Complies with: AS/NZS 1891.4: 2009 Single Point Anchorage (15Kn) Complies with: AS/NZS 1891.2: Suppliment 1:2001 Static Line Use (15Kn) Standards Australia is currently reviewing the non-mandatory AS/NZS 5532 standard based on the outcomes of an industry forum hosted in February of this year with a view to issuing a revised standard. To find out more click here



The ANKAme Roof Anchor Applications unique advantages

  • Free Fall Arrest single point anchorage ( 15kn )
  • Static Line System – As per owner manual
  • Compliant and Certified to current AS/NZS
  • Surface mountable and comes with fastenings
  • Light weight ( 3kg )
  • Adapts to metal roof sheets and concrete
  • Permanent or Temporary roof anchors
  • Aligns to roof screw pattern and profile