Tile roof anchor point strop | Temporary

OUT OF STOCK DUE TO HIGH DEMAND, NEW STOCK ARRIVING SOON

FREE SHIPPING

Current Stock:
SKU:
1.3STRAP
Availability:
This product usually ships within 3-4 business day's.
Weight:
2.00 KGS
  • Visa
  • Mastercard
  • Paypal
  • Apple Pay

 

 

Tile Roof Anchor Point Strop | Temporary

 SPANSET 1.3m Anchor Strap ( temporary anchor point strop for tile roofs ) 2023 current

20% OFF RRP - Limited Time

This Spanset tile roof anchor strop is made from high grade webbing material with steel D-rings at either end of the 1.3 meter long tile roof anchor strop
Type: Webbing
Orientation of use: Choke or Basket
MBS Rating: 22kN (choke)
Connection: To D Ring
  • These anchor straps are designed to be used in a choked or basket configuration 
  • For use by one person only
  • You must wear appropriate and complaint equipment with this product
To be used as an anchor strap for connection to a adequate, solid permanent structure at one end, and a lanyard, restraint fall arrest devices.
To be installed and used by a competent person, if in doubt consult an engineer

 

FAQ / Read more .....

 

What is a competent person

A person who has, through a combination of training, education and experience, acquired knowledge and skills enabling that person to correctly perform a specified task.

When do I need to use a tile roof anchor point 

  • The Work at Height Regulations 2005 state that whenever there is the potential for a person to fall while working and this leads to injury, then the worker must have some form of protection. What type of protection depends on a risk assessment being carried out and a method of protection selected from the hierarchy of control.

Why are temporary tile roof anchors required and used 

  • A roof anchor strop is used as a safety device to protect a worker from falling at heights.

What is a tile roof anchor strop 

  • A roof anchor strop is a devise fastened to the metal or timber structure to the underside of the tile roof, where a worker will then attach their harness rope line to secure themselves with a safety harness.

Who can use a tile roof anchor strop point 

  • As per the Australian standards a competent person can install and use a roof anchor point, as per the manufacture's installation and user manual.

Who can install a tile roof anchor point strop 

  • As per the Australian standards a competent person can install and use a roof anchor point, as per the manufacture's installation and user manual.

How do you install a tile roof anchor point strop 

  • As per the Australian standards a competent person can install and use a roof anchor point, as per the manufacture's installation and user manual.

What is the minimum strength of a roof anchor point 

  • The minimum strength for a roof anchor point for 1 person is 15Kn ( 1 person per roof anchor per system ).

How do you use a temporary or permanent roof anchor point 

  • You need to deem yourself competent and refer to the manufacture's installation instructions user manual, if in doubt you must contact a competent person or the manufacture, as the products must be used and installed by a competent person.

How often do roof anchors need to be inspected  

  • As per the AS/NZS all roof anchors need to be visually inspected prior to each use, and for permanent roof anchors an annual inspection is required every 12 months from the date of installation.

When and how to inspect a roof anchor 

  • Every day you turn up to a roof where roof anchor points are already installed or needs to be installed you must check they are fully compliant to AS/NZS 18914:2009, and meet the 15kN load requirement, you must also refer to the owner's manual for correct installation and use, if in doubt ask the manufacture or contact a competent person such as a structural engineer.

How many roof anchor points do you need on a roof 

  • It is the responsibility of a competent person to understand how many roof anchor points are required as each roof type and layout is different to the next, or you would need to contact US to locate a competent installer in your area.

How far apart should roof anchors be 

  • It is the responsibility of a competent person to understand how many roof anchor points are required as each roof type and layout is different to the next, or you would need to contact US to locate a competent installer in your area.

Contact a roof anchor installer near me 

  • contact us if you need assistance with installations of our ANKAme roof anchor points and height safety equipment.

 

 Height Safety Shop ALL

 

We recently purchased 6 roofer kits from ANKAme height safety and are very happy with the quality and usability of the products, the roof anchors are very easy to install as they come with QR user guide and colour coded installation instructions on each anchor. Perfect for what we need.

Totally recommend this product for anyone wanting compliant height safety products to keep their staff safe when working at heights.

- Derek Phillips

We install ANKAme height safety products across Melbourne, we wouldn’t use any other product, roof anchors come with signed test report for customer satisfaction and compliance to current AS/NZS 1891.4:2009. Roof anchor and height safety installations servicing all areas of Melbourne 0412728773

- Joe Conway

I recently purchased temporary roof anchoring equipment and found the product very easy to use, made of quality materials - essential for working safely on roofs. The equipment arrived in satisfactory time with no hassles. I would definitely use ANKAme again for roof safety equipment.

- Rob Baker

I bought an Ankame temporary anchor point more than a year ago. My business is building repairs & maintenance so we are often on domestic roofs. It is easy to use and was delivered promptly. I highly recommend this product.

- David Kay
VIEW ALL REVIEWS