ROOFER KIT 2 ( Designed for metal & tile roofs )

30% OFF RRP - Limited Time

What Makes Us Different:

• Roofers kit 2 is designed for both metal roofs and tile roofs, for working safely & easily on roofs, height safety roofer safety kits

• ANKAme the ONLY fully compliant height safety temporary roof anchor point, tested & approved by a division of SafeWork NSW  Certificate of Test Report 

• ANKAme Roof anchor aligns to the roof screw pattern and profiles of the x3 most common types of metal roof sheeting & ( Custom orb / Trim-Deck / Spandeck ) and concrete application )

• This safety roofing kit can be installed and used by any competent person, tradie or DIY, as per AS/NZS & user manual's provided

• Spanset spectra body roof worker harness comes with d-rings fitted front & rear of harness

• Spanset harness rope, inbuilt shock absorber, rope grab & end connector hook

• Spanset anchor strap, used for temporary anchor point use on tile roofs

• Simple installation & use method

• Fully compliant products to AS/NZS as per the falls code of practice

• Australian made products 

We guarantee your safety

Roofer Kit 2 includes:

• 1 x Temporary ANKAme Roof Anchor point - metal roof (includes fastenings, owners manual & carry bag)

• 1 x Temporary Spanset Strap Roof Anchor point - Tile roofs 

• 1 x Roofers Harness

• 1 x Harness Rope  (includes shock absorber, end hook and rope grab)

• 1 x Karabiner

• 1 x Spanset back pack carry bag

The height safety Roofers Kit 2 products comply with AS/NZS, as per falls code of practice

Great for those short term or long term tight access jobs when working at heights

HEIGHT SAFETY ROOF WORKER SAFETY KIT COMPLIANCE INFORMATION

When working at height it may be necessary for a worker to use personal protective equipment to safeguard against falls from height. The worker or their employer should carry out a risk assessment to ensure that the choice of equipment is appropriate in accordance with the “Work at Height Regulations 2005”. The Roofers Kit 2 provides the worker with the ability to prevent falls over an exposed edge. The Roofers Kit 2 is for use on flat, or inclined roofs and is easily connected to the fixed ANKAme roof anchor eyebolt once installed on the roof, or can be used in horizontal anchorage line systems

FAQ / Read more .... 

What is a competent person

A person who has, through a combination of training, education and experience, acquired knowledge and skills enabling that person to correctly perform a specified task

When do I need to wear a height safety roof workers harness Kit

• The Work at Height Regulations 2005 state that whenever there is the potential for a person to fall while working and this leads to injury, then the worker must have some form of protection. What type of protection depends on a risk assessment being carried out by a competent person and a method of protection selected from the hierarchy of control.

Who can use a height safety roofers kits 

• As per AS/NZS 1891 series of standards a competent person can use height safety harness kits and as per the manufacture's installation instructions.

 How to use a height safety roof harness kit

• As per AS/NZS 1891 series of standards a competent person can use roof safety kits and as per the manufacture's installation instructions.

Roof worker height safety kits near me 

• Yes the ANKAme roof safety kits and height safety equipment are sold online and with over 33 trusted re-sellers Australia wide.

      What is a roof harness kit

• A roof harness kit is a combination of height safety products such as a anchor point, roof safety harness, harness rope with rope grab and rope hook, 2 meter shock absorber that's attached from the harness rope to the anchor point. The worker can then work safely at heights