How to Install

It's Quick and Easy to Install ANKAme Roof Anchors

How to Install Temporary Roof Anchor Adapts

am-mainb-2-300x121.jpg

Install Roof Anchors, Temporary Fix

  • Remove existing roofing screws where required, place ANKAme roof anchors into position as per (owner’s manual installation instructions) fasten to roof anchors with specified fastenings, to remove undo the specified fastenings, remove roof anchors and replace existing screws.

Install Roof Anchors, Temporary Fix for Concrete

  • Place ANKAme roof anchor into position as per (owner’s manual installation instructions) fasten to min. grade 32mPa concrete with specified fastenings, to remove/undo the specified fastenings and remove roof anchors.

How to Install Permanent Roof Anchor Adapts

am-mainb-5-300x121.jpg

Install Roof Anchors, Permanent Fix for Roof

  • Place ANKAme roof anchor into position as per (owner’s manual installation instructions) fasten to roof anchor with specified fastenings

Install Roof Anchors, Permanent Fix for Roof

  • Place ANKAme roof anchor into position as per (owner’s manual installation instructions) fasten to min. grade 32mPa concrete with specified fastenings.

Installing ANKAme Roof Anchors

Installing an ANKAme roof anchor

The ANKAme roof anchor is quick and simple to install, as demonstrated in this video.
Fixing the ANKAme roof anchor is as simple as removing the existing roofing screws where required, placing the ANKAme into its position and fastening it to the roof.

To remove the ANKAme roof anchor is just as easy, undo the specified fastenings, remove roof anchor and replace existing screws, it is just that easy with the ANKAme roof anchor system.

The ANKAme roof anchor is perfect for:
Roof installations, roof maintenance, roof painting, aerial installations, solar panel installations, abseiling over buildings with concrete fix, roof footing, ladder footing, wall, roof and ladder anchor ties.

Removing ANKAme Roof Anchors

Temporary/Permanent Fix Accredited Roof Anchors

Surface mountable, reusable, lightweight, easy to store. All current roof anchors in Australia must now be rated to 15kN or higher to be used as a legal roof anchor. Don’t put yourself or your employees at risk with the rest, GET HOOKED UP TODAY. This roof anchor has been tested by a NATA Accredited company and complies to as/NZS 1891.4: 2009 Single Point Anchorage (15kN) and AS/NZS 1891.2 Supplement 1:2001 Static Line Use, tested to withstand (15kN), approximately 1.5 tonne of force in directional load testing, use for free-fall arrest single point anchorage, for one person per anchor only. To be installed and used by competent persons only.

Can be used for: Roof installations, roof maintenance, roof painting, aerial installations, solar panel installations, abseiling over buildings with concrete fix, roof footing, ladder footing, wall, roof and ladder anchor ties.