Aligns to roof sheet profiles & adapts to x5 of the most common metal roofs & concrete fix ( surface mounted on tops of roof sheet ribs )
The only roof anchor tested and approved by a division of SafeWork NSW ( NATA accredited for testing roof anchor points to AS/NZS 1891.4:2009 - current standard of compliance ) tested to 15kn of static load ( approximately 1.5 tonnes of load in direction of fall ) refer to our test report.Certificate of Test Report
Can be installed and used by any competent person, tradie or DIY
Simple installation method, with QR code user manual and colour coded installation instructions on each roof anchor ( for easy install )
Comes with, fastenings, installation tag ( need riveting tool for installation )
Strong and durable ( 3kg )
Default colour Gull Grey
Adapts to the x5 most common types of metal roof sheeting & concrete application
- Custom Orb / Corrugated
- Trimdeck / Monoclad / Steelclad
- Klip-Lok 700
- Klip-Lok 500
- Concrete fix
We guarantee your safety with our products
PERMANENT ANCHOR FIX
(min. grade sheet thickness 0.42mm) with 1 x Bulb-tite 7.7mm x 27mm RV6605-9-6W fixed in sequence as indicated below. To be installed and used by competent persons.
USER INSPECTION & MAINTENANCE
It is a requirement that the roof anchor be inspected prior to each use, if any of the following are evident, the roof anchor must be removed from service immediately: Any defects, absent markings/ labelling, evidence of missing parts, or if the roof anchor has been used in a fall. Roof anchor not to be used in a corrosive environment. Permanent anchor to be used in the direction of eyebolt only. Roof anchor to be used only where roof sheeting has been fully installed in accordance with manufacturers recommendations. Roof sheeting profile can vary up to 5mm, inspect roof sheeting prior to installation of roof anchor. Roof anchor to be cleaned regularly with a damp cloth.
Complies with: AS/NZS 1891.4: 2009 Single Point Anchorage (15Kn)
Complies with: AS/NZS 1891.2: Supplement 1:2001 Static Line Use (15Kn)
By purchasing a PERMANENT ANKAme you are deemed to be a competent installer, or have contacted a competent installer, as the manufacturer and seller take no responsibility for the misuse of the products. Refer to owners manual installation instructions for the correct use of these items.