Australian Standards AS/NZS 5532 and AS/NZS 1891.4
The Work Health and Safety legislation, SafeWork NSW has published a fall arrest anchors fact sheet explaining their expectations.
Find ou…
The simplicity of the ANKAme roof anchor installation system allows the worker to save time and properly secure themselves and others before accidents can have time to occur.
The roof a…
This risks associated working at heights video is the first in a series of short videos which give you loads of useful information and safety tips to limit the risk of falling or injury f…
Ladders are great for simple, temporary roof access. But it’s important to assess for risk and take measures to reduce the danger of a fall or injury.
This can be done by following this simple…
Every year a significant number of trades, construction and maintenance workers are injured while working at heights. This is often due to poor assessment of risks, failure to install the…
Protecting workers from falling from the edge of a roof is known in the roof safety industry as edge protection. There are a number of different height safety solutions that provide this…
For people who must work on a roof, there are several height safety solutions to keep them from falling. These come under the banner of personal protective equipment (PPE).
Static Line…
Safety Harnesses and harness systems used for working at heights are normally a parachute type harness, attached to a flexible lanyard, which is then connected to a temporary or permanent a…
The risk assessment for working at heights should always be carried out by a qualified expert. The equipment used must be of the highest standard of design and manufacture, correctly inst…